Written by IAPMO 2:37 pm Code News

IAPMO Seeking Task Group Participants for 2012 Code Cycle

The International Association of Plumbing and Mechanical Officials (IAPMO) is now accepting applications at its Website from individuals wishing to participate on soon-to-be formed Task Groups working toward the development of the 2012 editions of the Uniform Plumbing Code (UPC©) and Uniform Mechanical Code (UMC©). Applicants must submit their completed application form by Sept. 18. Information and downloadable application forms can be found here.

The UPC and UMC are developed using an American National Standards Institute (ANSI) accredited consensus process, signifying that the procedures used by standards setting organizations such as IAPMO meet the Institute’s requirements for openness, balance, consensus and due process. This process brings together volunteers representing a variety of viewpoints and interests to achieve consensus on plumbing and mechanical practices. The UPC and UMC are the only plumbing and mechanical codes of practice to be named American National Standards.

In accordance with the rules and regulations that govern these procedures, a Technical Committee (TC) or Technical Correlating Committee (TCC) may create Task Groups to address a specific topic or problem. Persons serving on a Task Group need not be members of the TC or TCC.

Task Groups meet in person and/or via conference calls to discuss solutions and then forward their recommendations along with a report of any underlying issues to the TC or TCC for action.

IAPMO is seeking volunteers for the following Task Groups:
• UPC Correlation Task Group to identify technical and editorial inconsistencies within the 2009 UPC.
• UPC Standards Task Group to add cross-references to Table 14-1 Index of the 2009 UPC to indicate where code sections of each standard are referenced and to update the format of standards based on materials and products.
• UMC Ventilation Task Group to provide an alternate method in order to obtain outdoor air rates.
• UMC Correlation Task Group to identify technical and editorial inconsistencies with in the 2009 UMC.
• UMC Standards Task Group to add cross-references to Table 14-1 Index of the 2009 UMC to indicate where code sections of each standard are referenced and to update the format of standards based on materials and products.

For more information on Uniform Code development and/or Task Group participation direct your Web browser here or contact Matt Sigler, UPC staff liaison, at (909) 230-5535 or matt.sigler@iapmo.org, and Adam Muliawan, UMC staff liaison, at (909) 472-4111 or adam.muliawan@iapmo.org.

Sponsor of the Uniform Codes, IAPMO – The International Association of Plumbing and Mechanical Officials – works in concert with government and industry for safe, sanitary plumbing and mechanical systems. Learn more about IAPMO at www.iapmo.org.

IAPMO

IAPMO develops and publishes the Uniform Plumbing Code®,the most widely recognized code of practice used by the plumbing industry worldwide; Uniform Mechanical Code®; Uniform Swimming Pool, Spa and Hot Tub Code®; and Uniform Solar Energy, Hydronics and Geothermal Code — the only plumbing, mechanical, solar energy and swimming pool codes designated by ANSI as American National Standards — and the Water Efficiency Standard (WE-Stand)™. IAPMO works with government, contractors, labor force, and manufacturers to produce product standards, technical manuals, personnel certification/educational programs and additional resources in order to meet the ever-evolving demands of the industry in protecting public health and safety.

Last modified: December 30, 2022

Close