
Charles Goede’s first day at the 2026 WorldSkills Competition in Shanghai, China, didn’t go quite as he had hoped.
The 20-year-old plumbing apprentice from Connecticut faced a demanding six-and-a-half-hour project involving the installation of plumbing fixtures, carriers, water supply lines and drainage piping. Competing against some of the world’s most skilled young tradespeople, Goede was unable to complete the assignment within the allotted time.
“I think day one was pretty challenging altogether,” he said. “They asked a lot, workwise, to get done in such a short time. And then, of course, it’s your first day there, so you’ve got some nerves and you’re not used to the surroundings.”
Goede bounced back over the next three days, improving his performance and completing subsequent modules ahead of schedule, allowing him to carry unused time forward to later assignments. He ultimately earned a Medal for Excellence in Plumbing and Heating, becoming the first American to receive the distinction in the category since 2017.
Goede’s path to WorldSkills began after he won the 2024 SkillsUSA Connecticut plumbing championship and finished second nationally. An invitation to apply for the international competition nearly went unnoticed because it was sent to an inactive school email account, but a former adviser forwarded it to him. Following a Zoom interview with representatives from IAPMO, the Plumbing-Heating-Cooling Contractors Association (PHCC) and SkillsUSA, Goede was selected to represent the United States. IAPMO subsequently helped support his preparation alongside the UA and PHCC.
For Goede, a fourth-year apprentice with United Association (UA) Local 777 Plumbers & Pipefitters in Meriden, Connecticut, the key was putting the first day behind him.
“I didn’t let day one hang me up or anything like that,” he said. “So I was able to overlook day one and just focus on the next parts and not look back.”



Four Days of Competition
Held Sept. 22–27, WorldSkills brought together nearly 1,400 competitors from 73 countries and regions across 64 trade disciplines. Goede was among 32 contestants in Plumbing and Heating.
The competition consisted of four major modules testing different installation skills, along with a separate speed challenge. The opening module required competitors to install plumbing fixtures and carriers, along with their associated water supply and drainage connections. The work incorporated copper soldering, press connections and multilayer PEX.
Larry Shoemaker, who served as Goede’s WorldSkills expert and helped oversee his preparation through the Plumbing-Heating-Cooling Contractors Association (PHCC), said the opening assignment proved difficult for nearly everyone. He recalled that only four competitors finished the module, and they barely completed it within the allotted time.
Shoemaker said the competitors didn’t return from the opening ceremony until at least midnight, leaving them little time to rest before the competition began the following morning.
Vinnie Valente, training coordinator for UA Local 777 and Goede’s primary trainer, said the first day tested Goede’s determination.
“The end of the first day of competition was a true ‘make or break’ moment for Charlie,” Valente said. “Not everything went his way that day. It was a tough day, long way from home.”
The second day’s project involved installing two stainless steel sinks and a point-of-use water heater, with stainless steel supply piping and high-density polyethylene drainage connections. Competitors used butt-fusion and electrofusion joining techniques.
The third day focused on a simulated heating system incorporating galvanized threaded piping, copper manifolds, a circulating pump and multilayer PEX connections.
On the final day, competitors installed fixture trim and completed a surprise assignment involving a heat pump water heater. Without a blueprint showing how the connections should be routed, they had to connect the unit to previously installed valves using no more than eight pipe bends.
Goede completed the connections using seven bends. Shoemaker said he also adjusted his approach after they discussed the assignment during a break.
Goede also distinguished himself in an area where other competitors struggled.
“He did really well with the carriers. He did really well with the piping and the pipe bending, especially when it came to the steel,” Shoemaker said. “There was a lot of people that were really having a difficult time trying to bend that, and he just ran away with it.”
Goede also excelled in the speed challenge, completing the installation of a GROHE shower carrier in approximately 10 minutes, one of the fastest times among the competitors.



Recognition on the World Stage
The results were announced during the closing ceremony, where organizers recognized the top three finishers before displaying the names of competitors who had earned a Medal for Excellence.
Goede finished with 704 points, surpassing the 700-point threshold required for the distinction. Valente said Goede’s score was the highest ever achieved by a U.S. competitor in the category.
Goede recalled seeing his name displayed during the closing ceremony.
“It’s hard to say what was going through my mind, but I was pretty happy to see my name up there,” he said.
Preparation and Partnership
Much of Goede’s preparation took place at the UA Local 777 training center, where Valente worked with him on unfamiliar materials, installation methods and timed projects. Additional instruction included training with UA members experienced in tube bending and a specialized course at the UA’s Great Lakes Training Center.
Altogether, Goede completed approximately 250 hours of intensive training while continuing to work full time.
Valente said the competition required proficiency in a wide range of techniques, including threading, soldering, pressing, butt fusion, electrofusion and tube bending. Many of the components also differed from those typically used in the United States.
“Every piece of the training mattered,” Valente said. “Every skill mattered. ‘Good enough’ wasn’t acceptable.”
Shoemaker worked with Valente to develop training projects, research competition requirements and prepare Goede for the technical challenges he would face.
His responsibilities continued in Shanghai, where he arrived several days early to help prepare workstations, review tools and materials, and establish assessment procedures with experts from other countries. During the competition, he also participated in nightly assessments of competitors’ work.
Shoemaker said the experts often worked from early morning until late evening, long after the competitors had finished their assignments.
PHCC helped secure funding and resources, while the UA provided training facilities and technical expertise. IAPMO, SkillsUSA and DEWALT also supported Goede’s participation.
“Charles’ achievement is a tremendous accomplishment for him and the U.S. plumbing industry,” IAPMO CEO Dave Viola said. “IAPMO has supported WorldSkills for many years because we recognize the importance of developing the next generation of skilled tradespeople. His success reflects not only his hard work and dedication, but also what can be accomplished when organizations across the industry work together to support young professionals.”
Goede said the support he received from across the industry was particularly meaningful.
“It was pretty incredible having such a wide group of support coming from all the different sectors of the trade,” he said.
He also credited Valente and Shoemaker for the time they devoted to his preparation, including long training days and trips to international training events.
For Shoemaker, PHCC’s involvement reflects a broader effort to encourage young people to pursue careers in plumbing and HVAC.
“The more we can do to show that plumbing is a great trade is the biggest thing,” he said. “We want to get as many people into the plumbing and HVAC trade as we can.”


LEFT: Goede (third from right) is joined by Larry Shoemaker (center), WorldSkills 2026 Skills- USA plumbing expert with the PHCC Educational Foundation, and Manfred Kühn (second from right), global product trainer with GROHE AG, during WorldSkills Shanghai 2026. Kühn presents Goede with a GROHE backpack. RIGHT: Goede stands beside a heat pump water heater used in the competition’s final assignment. PHOTOS COURTESY OF WORLDSKILLS
Looking Ahead
Beyond the technical challenges and recognition, Goede said one of the most memorable aspects of Shanghai was meeting competitors from other countries.
Despite the pressure of international competition, he described a friendly atmosphere among the Plumbing and Heating contestants. They spent breaks together in a communal area, talking about their experiences and getting to know one another.
Goede also picked up techniques and ideas from observing completed projects and speaking with fellow competitors.
The experience strengthened Goede’s commitment to the trade and introduced him to specialized work he hadn’t previously considered. He is already using the tube-bending skills he developed for WorldSkills while working at a nuclear power plant.
“I’m on a job right now at a nuclear power plant doing tube bending,” he said. “But that wasn’t something that I was looking at when I first started the career.”
Goede expects to complete his apprenticeship and take his journeyman’s exam before the end of the year.
He reflected on the challenges of preparing for and competing at WorldSkills.
“It wasn’t all sunshine and rainbows; I had to put a lot of hard work in and so did everybody else around me,” he said. “But it was definitely worth it at the end.”

Mike Flenniken
Mike Flenniken is a staff writer, Marketing and Communications, for IAPMO. Prior to joining IAPMO in 2010, Flenniken worked in public relations for a group of Southern California hospitals and as a journalist in writing and editing capacities for various Southern California daily newspapers.
Last modified: November 17, 2026